Showing posts with label Objet. Show all posts
Showing posts with label Objet. Show all posts

Thursday, October 29, 2026

PolyJet in 2026: The Honest Downsides (and Where It Still Shines)

PolyJet in 2026: where Stratasys J-Series struggles and where it shines

Full disclosure up front: PolyJet is not my favorite 3D printing process. I've been around additive manufacturing for almost 20 years, and I've watched a lot of people buy a PolyJet machine expecting it to do things it was never designed to do.

That said, when the job fits, nothing else touches it. So here's my honest 2026 take on what used to be Objet and Connex and is now the Stratasys J-Series: the downsides first, then where it genuinely earns its keep.

Quick background: Objet, Connex, now J-Series

I covered the basics in Beyond the Prototype: Understanding Stratasys Objet and J Series 3D Printing, so here's the short version. PolyJet works a lot like an office inkjet printer. Print heads jet tiny droplets of liquid photopolymer onto a build tray, and UV lamps cure each layer right away. Because several materials can be jetted at once, you can mix rigid, rubber-like, clear and colored resins in a single part.

Objet developed the technology and merged with Stratasys in 2012. The Connex machines introduced multi-material printing, and today's J-Series carries that forward with models like the J55, J826 Prime and J850 Prime. Layer thickness runs from about 18 to 27 microns, the J850 Prime can jet 7 materials at once with over 500,000 colors, and its tray is 490 x 390 x 200 mm.

The honest downsides

1. The parts aren't tough. Most PolyJet materials are acrylic-based photopolymers. They look fantastic, but they're brittle compared with nylon, ABS or polycarbonate. Snap fits crack, thin walls chip, and drop tests rarely end well. Parts are also weaker in Z.

2. They don't like heat or sunlight. Long-term heat, UV exposure and humidity cause warping, color shift and strength loss. A PolyJet part that looks perfect on day one can look tired a few months later on a sunny windowsill. This is not an end-use outdoor material.

3. It's expensive to run. The resins cost more than most other processes, and you also burn through support material, which can be a big share of every build. Add printhead replacements and service contracts, and PolyJet is usually more expensive per part than SLA, DLP or SLS.

4. Support removal isn't free. Depending on the support type, you're either waterjetting gel-like support off by hand or soaking parts in a cleaning bath. On parts with fine internal channels, that takes real time and care.

5. Flexible materials tear. The rubber-like Agilus-style materials feel great for a demo, but they have limited tear strength and fatigue life. Great for showing how a grip feels, not great for a seal that flexes thousands of times.

6. The build volume is modest. Even the larger J8 machines top out around 490 x 390 x 200 mm. Big parts get split and glued, and glue lines show up in exactly the places a "looks-like" model is supposed to look perfect.

7. It's a prototype process, not a production one. Every material is a simulation of something else: "ABS-like," "polypropylene-like," "rubber-like." If your test depends on real engineering-plastic behavior, PolyJet can give you a false pass or a false fail.

Where PolyJet genuinely shines

Looks-like models and CMF reviews. Full color, Pantone-validated matching on most J-Series models, clear parts and soft-touch overmold simulations in one print. For a design review or a trade show model, this is where PolyJet is hard to beat.

Medical and anatomical models. Surgical planning models that combine hard bone-like and soft tissue-like materials, with color coding, are one of the best uses of the technology. Stratasys built a dedicated Digital Anatomy line around it.

Dental. Dental labs use PolyJet for models and multi-color, multi-material work where detail matters more than toughness.

Overmold and multi-material prototypes. A rigid housing with a rubbery grip, printed as one part, lets you test ergonomics before paying for two-shot tooling.

Short-run tooling. Some teams print injection-mold inserts in high-temperature PolyJet materials for a few dozen test shots in the real production plastic. It won't replace steel, but it can validate a design before you cut it.

Marketing, packaging and fashion. Realistic packaging mockups, textures, labels and even prints directly onto fabric. When the goal is "make people believe it's real," PolyJet delivers.

My rule of thumb

If you need...Use PolyJet?Better choice
A full-color, multi-material looks-like modelYesPolyJet is the best tool here
A surgical planning or anatomical modelYesPolyJet
Functional parts that snap, flex or take impactNoMJF or SLS nylon
Parts used outdoors or near heatNoMJF PA12/PA11, FDM in ASA or PC
Hundreds of identical production partsNoMJF, SLS or injection molding
Smooth, detailed single-material parts at lower costMaybeSLA or DLP

Bottom line

PolyJet is a show pony, and I mean that with some respect. It's the best process I know for making a part look and feel like the finished product. It's one of the worst for making a part that has to survive real life. Use it for what it's great at, and send the functional and production work to a process built for it.

Where do you land on PolyJet? Do you love it, tolerate it, or quietly wish your company had bought something else?

Tim Ruffner has spent almost 20 years in additive manufacturing and works at 3D Parts Unlimited. Connect with him on LinkedIn.